This article examines the possible causes of a faulty GFCI receptacle, how to use a tester to determine if the GFCI receptacle is faulty, and how to replace the receptacle.
This 7-part video series demonstrates all the steps for how to wire a switch: from rough-in to finishing. The first video in the series explains how to properly strip cable.
In part two of the 7-part series on how to wire a switch, I explain and demonstrate how to install the cables into a multi-gang box. The video focuses on steps that will both save time and simplify the process.
Proper grounding (earthing, bonding) methods are critical to ensuring the integrity of your electrical system. In part three of my 7-part video series on how to wire a switch, I demonstrate the proper way to connect the ground wires.
Making a proper splice is a basic skill that you must have in order to properly complete most tasks when it comes to electrical work. This video demonstrates proper methods for splicing the neutral conductors when wiring a switch.
Part five of this 7-part video series on how to wire a switch: from rough-in to finishing, demonstrates the proper splicing and pigtailing the hot conductors for installation in a multi-gang box.
After the wallboard is on and the painting is done, it’s time for the stage we call finishing. We’ll install the wall switch and be ready for the finishing wall plate.
Posts/videos may contain affiliate links. If you purchase a product through an affiliate link, your cost will be the same but Electrical-online will automatically receive a small commission. Your support is greatly appreciated and helps support my efforts to produce more helpful articles and videos!
Nullam quis risus eget urna mollis ornare vel eu leo. Aenean lacinia bibendum nulla sed
